How To Change Battery In Chevy Key Fob?

Similarly, How do I change the battery in my Chevy key fob?

Replacement Battery for Chevrolet Flip Key Remove the rear cover from your key fob by flipping the metal key blade. Remove the old, dead battery and install a new CR2032 3V battery in its place. Make sure the new battery is positioned in the same spot as the old one. You should be good to go after replacing the key fob cover!

Also, it is asked, How do you change the battery in a 2018 Chevy key fob?

Replacement Battery for Chevrolet Key Fob Remote To open the key fob, insert a flathead screwdriver into a tiny gap on the side and twist. Replace the old battery with a new CR2032 button cell battery, giving special care to the positive side. Reassemble the key fob, and you should be good to go!

Secondly, How do you program a Chevy key fob?

Press and hold the “Unlock” and “Lock” buttons on your Chevy key fob at the same time until you hear the door locks engage and disengage, confirming that you have successfully configured your key fob. To complete the programming procedure, put the freshly programmed key into the ignition in the “On” position.

Also, What size battery does a GMC key fob take?

3V CR2032 battery

People also ask, What battery does a GMC key fob take?

A CR2032 battery is required to replace the battery in this GMC key fob. The metal key is flipped open. With your thumb, pry the rear cover off the key fob. Remove the old battery from the key fob and throw it away.

Related Questions and Answers

How do you open a key fob?

Activate your key fob. In most cases, all you need is a firm fingernail to unlock your key fob. If it doesn’t work, carefully push it open with a tiny flat head screwdriver. Pry lightly from many locations around the key fob to prevent shattering the shell.

How much is a replacement Chevy key fob?

The price of programming a new Chevy key is determined on the kind of key you need. Chip keys (double cut keys) cost roughly $75, whereas laser cut keys cost somewhere between $135 and $275. If you need a duplicate of a Chevy key that you still have, you may get one made by a vehicle dealer or locksmith.

How do you start a Chevy Trax with a dead key fob?

Simply place the key fob in the front cup holder, close the doors, and start the vehicle normally by stepping on the brake and pressing the Start/Stop ignition button. The Trax, which received push button start for the first time in 2017, also has a backup space in the front cup holder.

Why is my automatic start not working?

The following are reasons why your remote start isn’t working: Not in ‘Park’ mode Too many attempts at remote start. Oil and Coolant Pressure Hood is unlatched.

Can you program a key fob by yourself?

Is it possible to configure a fresh key fob yourself? If you simply need to configure the key fob to open the vehicle, you can usually do it yourself. However, without the proper tools, programming a key for the start function is difficult.

How much does it cost to get a key fob programmed?

How do you program a 2021 Chevy key fob?

Simultaneously press and hold the lock and unlock buttons on your key fob. Keep your hands on them until you hear the doors lock and unlock again. This indicates that the matching was successful! Replace the programmed key in the ignition and turn it to “On” to complete the operation.


If you want to change the battery in your Chevy Key Fob, it is very easy. You just need to follow these steps:
1. Remove the old battery from the key fob by pressing and holding down on the back of the key fob button for a few seconds before releasing.
2. Insert a new CR1620 3V lithium coin cell battery into the key fob.
3. Press and hold down on the back of the key fob button until you hear three beeps and release it when you hear two more beeps.
4. Replace the cover over the battery compartment with one hand while still holding down on the button with your other hand for about 10 seconds to ensure that it’s secure before releasing both hands from it.
5. Reinsert your old battery into its original location if applicable or replace with a new one if desired and turn on your car’s ignition switch to test out your newly installed key fob battery!

This Video Should Help:

The “2018 chevy key fob battery replacement” is a question that has been asked many times. The process for changing the battery in the Chevy Key Fob is relatively easy and can be done by any person with basic hand tools.

Related Tags

  • chevy silverado key fob battery
  • how to change battery in chevy key fob 2016
  • how to change battery in chevy key fob 2011

Similar Posts