How To Remove Nest Thermostat Using Only Three Tools

The Nest thermostat is a temperature control system that allows you to control how cold or hot you may want your home and office to be. This Nest thermostat is Wi-Fi-enabled and programmable. This makes it very friendly and convenient for home use. It is ideally set up in the central room of the house. We will discuss how to remove Nest thermostat in this article.

Why Should You Reset Your Nest Thermostat?

You may want to move to a new house but still want to retain your Nest thermostat. In order to remove a nest thermostat, you need to reset it first from the account settings. If you do not reset it, it will be rendered useless the next time you try to set it up. Smart thermostats such as the Nest thermostat are useful and become part of our lives due to digital trends.

This thermostat has a Nest app that allows you to run the entire smart home automation device by tapping on a couple of buttons. The thermometer stores your preferred temperature settings to ensure that you are always comfortable. The Nest learning thermostat tells the actual temperature as well as a countdown CLK to the change of next heating temperature.

Nest thermostats are programmed to track your energy consumption and save you money on your energy bill. The Nest app also sends you an entire breakdown of what proportion of energy you have used. It also sends you tips on how to save money on the account. We really love its simple yet sleek design that is friendly. But, of course, you have to take care of it.

Factory Resetting The Nest Thermostat

You are probably wondering why you need to factory reset this Nest product when you only want to remove it from the wall. Here's why. We briefly touched on why you have to factory reset your thermostat. First, you need to reset your thermostat account. Then, power it down first before you disconnect it from the wall. If you do not, you won't be able to use it again.

Remove A Nest Thermostat From Your Nest Account. This process will ensure that your thermostat can function properly. You do not want the Nest thermostat to start glitching and search for a Wi-Fi network where there is none. You have to remove the thermostat from the Nest account. To do this, open the Nest app from your phone to get to the account settings.

The aim is to remove the home that has the device you would like to get rid of. First, go to the main menu icon and press on it to reveal the settings icon. Next, tap on the thermostat that is to be removed. After that, press on the Settings menu that is in the upper right corner. Scroll downwards and select 'remove.' This will remove the thermostat.

After you have removed the device from the Nest account, you can now factory reset the thermostat. First, tap on the settings menu and scroll down to the setting menu on the top right corner. Next, swipe down until you see the 'reset button.' Tap on it and choose 'reset all settings. The factory reset will begin and should take a couple of minutes to complete.

How To Remove Nest Thermostat

How To Remove a Nest Thermostat

Now that you have completed the factory reset, you can start the process of removing the Nest thermostat. It can be a tricky process and can take a while. However, if you do follow the instructions thoroughly, you will be able to remove your thermostat without a hitch.

a) Turn Of The Circuit Breaker

We cannot tell you how important it is to turn off the power before you start working on the thermostat. The way to do this is to go to your house's breaker box and look for the circuit breaker that is connected to the Nest thermostat. Then, make you turn the light switch off. It is also smart to switch off other cooling unit equipment.

For example, equipment like the air conditioner unit in the HVAC system. How would you know if you switched off the right circuit breaker? Turn on the thermostat, and if it does not turn on, you are on the right path. It would be better to call HVAC services to remove your nest thermostat for you.

Searching for an online manual to help you work the breaker box as well is a good idea.

b) Have The Necessary Tools

This may be an obvious step to ensure you have. However, having the right tools to help will make your work fairly easy. You need masking tape, different types of screwdrivers, and a non-contact voltage tester. The tester will indicate if there is any voltage in the wires. The thermostat has an internal battery that will still be on.

The appropriate breaker should be switched off for the right thermostat wiring to be done. The internal battery that the Nest thermostat has is installed for power outages. This means that the thermostat will still be connected and function normally. Digital trends will have Nest products introduce the smart home feature that makes products like the Nest thermostat.

c) Remove The Nest Unit

Remove the thermostat unit from the wall by pulling it from the base plate. You will need to use a bit of force while pulling. However, you do not want to yank it and potentially cause damage. The wires should be visible underneath. After this, you need to test each wire for voltage using the non-contact voltage tester.

The readings should indicate that the breaker was actually switched off. There is an active need to turn off the heating and cooling units. The importance of turning of these units is so that a fuse does not blow. This would be frustrating because you will definitely have to get it fixed. The furnace unit also has to be switched off.

Mostly, you'll find the switch near the furnace itself.

d) Label The Wires

By now, you have pulled out the nest learning thermostat. Now you need to label the thermostat wires before removing them. First, labels should indicate the symbol where each wire connects to the thermostat. For example, these could be the white wire connected to 'W.'

If, however, there are no labels, you will have to label each wire connected to the terminal. With the use of masking tape, label each wire that is connected ted to a terminal writing the symbol for each. For example, the yellow wire should have the symbol 'Y' on it. The purpose of this is to ensure that the new thermostat will have the wires and terminals installed easily.

All the wires are held together by a cable. Pull the cable out of the wire a little.

e) Disconnect The Base Plate

Your screwdrivers will come in handy at this point. The base plate is small and round; thus, removing it should not be a big problem. Additionally, the trim plate is rectangular. Therefore, you will have to remove the base plate then the trim plate. Next, remove the wires connected by the cable. Ensure to do this carefully as they might get into the wall.

The c-wire should be there as well. Using screwdrivers, gently unscrew the two screws holding the nest base plate and set it aside. Next, repeat the same motion carefully, unscrewing the trim plate from the wall. The thermostat wires that are still attached to the wall should be left there.

However, they should be held together with masking tape. This will make it easier for the next thermostat installation.

f) Patch Up The Wall

Now that you have learned the process to remove the nest thermostat. Additionally, you have factory reset the thermostat from your nest ring as well. You have also disconnected the wires that connect the Nest thermostat. It is important to note that you now have a very rough-looking wall that was once where the old thermostat was.

You could fix this problem by either sanding down the wall and painting it or even placing a painting on it if you are going to install a new thermostat once more. It is also good to note and account that you could get wiring and installation services from a professional electrician. There could be problems that might occur during this process.

The Bottom Line

Removing the Nest thermostat as well as how to install it should be a simple process. As long as you have adequately followed the instructions above, you should have learned to disconnect your thermostat. After you have removed it, installing another nest thermostat should be fairly simple.

If, however, wiring and how to connect wires is not your cup of tea, you could easily get these services done by an HVAC professional. All in all, you should be able to sign in to your Nest thermostat account settings and reset the device. Of course, you could want to remove your Nest thermostat for a variety of reasons. Regardless, we got you.

Similar Posts